Septic Tank Cleaning Perth can be a very tough job and can require the use of a number of different methods to effectively remove harmful bacteria and toxins from your sewage. There are many different types of chemicals that are effective at removing these toxic chemicals, but it is not the most cost-effective option. By taking a look at some of the more common options available it will make it easier for you to decide which method of disposal is right for you.
Oil-based products: Petroleum-based oil-based products, such as glycol or hydrocal, are the most popular choice for cleaning septic tanks. Glycol and hydrocal can be applied with a pump-based or pimples machine and are also used to clean the ground in the tank. These two products contain additives that help to remove much of the sludge and biological materials that can form as a result of years of sewage treatment. However, they are not very cost-effective and can sometimes be quite costly.
Glycol and hydrocal can be used, in combination with other oil-based products, to clean your septic tank and reduce the amount of waste it produces. Glycol is slightly more expensive than hydrocal and may be a better choice if you have an area where you do not want to subject the tank to a lot of wear and tear. Many people also prefer to use glycol to control algae growth.
Chemical-based products: When combined with heat, a variety of chemicals can be used to destroy or remove organisms and sludge that build up in your tank. The most popular chemical is sorbic acid, which can be purchased in kits that are suitable for installation under the floor of the tank. This chemical can be added with the use of a pumpable unit or used alone.
Sorbic acid kills all of the organisms and sludge that build-up and remove the negative mineral ions that make it so toxic. It can be used alone or mixed with glycol or hydrocal.
Liquid cleaners: This method of septic tank cleaning will allow the user to use either an actual tank or a pumping unit. Either way, the liquids used will remove harmful pathogens and sludge from the tank.
The most popular product used is drain cleaner, which is often blended with detergent. These are typically fairly effective as a septic tank cleaning solution and are widely used.
Solar pumps: For deep cleans, pumps will often be used. These pumps will then pump the tank to the point that the water drains completely out of the tank and into a collection system.
Depending on the amount of sewage a home produces, a small or large pump may be needed to make the job easier. Small pumps will usually just be able to clean the tank enough to get rid of the harmful organisms and sludge and provide the pump with a steady supply of water.
Wind-up pumps: These pumps will clean the entire tank of the water before it reaches the collection system. They are incredibly quiet and are incredibly effective at removing the harmful bacteria and sludge that build up in your tank.
Biogas: Biogas is a gas that is produced from breaking down organic waste. This gas can be used as a method of tank cleaning and should be properly treated to ensure that it does not cause damage to your tank.
If you do not currently have a tank-cleaning solution, you should contact a septic tank cleaning company to come out and determine the amount of work required to complete the job. In some cases, this process can take longer than a standard household drain cleaner, but most companies will be able to provide estimates of how long the work will take for you.